黄色网络天天黄色插电影,三级黄在线高清,落后的欧洲和先进的亚洲,国内美女白浆视频久久网

揭陽焊接用二氧化碳儲罐
  • 揭陽焊接用二氧化碳儲罐
  • 揭陽焊接用二氧化碳儲罐
  • 揭陽焊接用二氧化碳儲罐

產品描述

品牌中杰特裝 型號CFL-20/2.16 類型低溫儲罐 材質16MnDR 適用物料LCO2
二氧化碳儲罐的長處
二氧化碳儲罐是儲存液態二氧化碳介質的儲存壓力容器。
二氧化碳儲罐內膽原料選用16MnDR,二氧化碳罐外膽原料為Q245R或者Q345R。
二氧化碳罐選用“組合、安全體系閥”運用兩組安全閥一起作業,在安全閥定時校驗時可關閉一側,另一側持續作業,保證二氧化碳罐的安全運轉。
二氧化碳罐選用熱態下的珠光砂為絕熱材料并抽真空,公司以共同的技術保證質量,以達到絕熱作用。
二氧化碳罐具有運用壽命長、構造緊湊、占地面積少、集中控制、操作和維修便利等特色。
二氧化碳罐的規劃壓力為2.2MPa
揭陽焊接用二氧化碳儲罐
液體的排放 liquid discharge
【產品詳情圖片】
2.4.1液體二氧化碳的正常排放是在儲罐增壓后,開啟V2排液閥,V3回氣閥,液體二氧化碳便流入汽化器汽化,供使用點使用。
The normal discharge of liquid carbon dioxide is after pressurization of the tank, open the V2 drain valve, V3 return valve, the liquid carbon dioxide will flow into the vaporizer vaporization for use point.
2.4.2為滿足排液過程的穩定壓力,應按“儲罐的增壓”操作方法進行增壓。
In order to meet the steady pressure of the drainage process, it should be pressurized according to the method of "pressurized tank".
【產品詳情圖片】
【標題】
揭陽焊接用二氧化碳儲罐
液體的儲存 liquid storage
液體二氧化碳的儲存屬于帶壓(壓力不低于0.8Mpa)儲存。儲存期間除壓力表、液位計、安全閥應投入使用外,其他閥門應處于關閉狀態。當儲罐壓力超過2.1Mpa時,開啟V7排氣閥降壓。但應注意:內罐的壓力不得降至低于0.8Mpa,否則將引起液體二氧化碳轉變?yōu)楦杀?br>Liquid carbon dioxide storage with pressure (pressure not less than 0.8Mpa) storage. During the storage, the pressure gauge,level gauge, safety valve should be put into use, the other valves should be closed. When the tank pressure exceeds 2.1Mpa, open the V7 exhaust valve buck. However, it should be noted that the pressure inside the tank must not drop below 0.8Mpa, otherwise liquid carbon dioxide will be converted to dry ice.
【產品詳情圖片】
【標題】
揭陽焊接用二氧化碳儲罐
儲罐的增壓 Tank pressurization
【產品詳情圖片】
當儲罐向外供液又需要穩定排液壓力時,可利用汽化器(另外配備)進行增壓。其操作過程如下:
The carburetor (available separately) can be used for boosting when the reservoir is supplied externally and requires stable discharge pressure. The operation is as follows:
2.3.1開啟V2排液閥,使液體二氧化碳汽化器汽化,開啟V3回氣閥(根據用戶回氣管路的設置,V3回氣閥可置于常開狀態)從汽化器分流出來的氣體返回儲罐上部,使儲罐內增壓。
Open the V2 drain valve to vaporize the liquid carbon dioxide vaporizer and open the V3 return valve (the V3 return valve can be normally open depending on the return air line of the user). The gas diverted from the vaporizer returns to the upper part of the tank , So that the pressure tank.
2.3.2當儲罐內壓力達到2.1Mpa時,可暫時關閉V3回氣閥。
When the tank pressure reaches 2.1Mpa, the valve can be temporarily closed V3 return gas valve.
2.3.3排液過程中,可通過控制V3回氣閥的開度,使增壓能力維持在壓力穩定的水平。
During drainage, the degree of pressurization can be maintained at a pressure-stable level by controlling the opening of the V3 return valve.
【產品詳情圖片】
-/gjehec/-

http://www.7qe.net
產品推薦

Development, design, production and sales in one of the manufacturing enterprises

您是第9585124位訪客

版權所有 ©2025-05-11 魯ICP備11026805號-109 山東中杰特種裝備股份有限公司 保留所有權利.

技術支持: 八方資源網 免責聲明 管理員入口 網站地圖
百度首頁推廣咨詢電話:18938958134 蔡經理 微信同號
曲周县| 阳朔县| 高安市| 温泉县| 赤城县| 渭源县| 凤山县| 辽宁省| 揭西县| 西乌珠穆沁旗| 汝州市| 娄烦县| 慈利县| 威信县| 西贡区| 永吉县| 安义县| 巫山县| 改则县| 商都县| 吉水县| 宁波市| 华安县| 鹰潭市| 安阳市| 建瓯市| 武陟县| 赣州市| 武威市| 静宁县| 文登市| 阿坝| 梁平县| 临泉县| 白水县| 灵寿县| 漯河市| 汶川县| 阿拉尔市| 翁源县| 原平市|